Distance between Acme Mill TN and Brookview AL
The distance from Acme Mill to Brookview is 214 miles by road including 212 miles on motorways. Road takes approximately 3 hours and 18 minutes and goes through Chattanooga, Athens, Cleveland, Fort Payne, Siberton, Steele and Mountain Brook.
Shortest distance by air | 194 mi ✈️ |
Car route length | 214.4 mi 🚗 |
Driving time | 3 h 18 min |
Fuel amount | 7.3 gal |
Fuel cost | 28.3 USD |
Point | Distance | Time | Fuel | |
Acme Mill | 0 mi | 00 min | 0.0 gal | |
I 75 7 mi, 06 min
|
||||
Athens | 7 mi | 06 min | 0.1 gal | |
I 75 25 mi, 21 min
|
||||
Cleveland | 32 mi | 28 min | 0.9 gal | |
I 75 23 mi, 21 min
|
||||
Chattanooga | 55 mi | 50 min | 1.4 gal | |
I 24 I 59 30 mi, 31 min
|
||||
Trenton | 86 mi | 1 h 21 min | 2.7 gal | |
I 59 25 mi, 24 min
|
||||
Fort Payne | 111 mi | 1 h 46 min | 3.2 gal | |
I 59 43 mi, 38 min
|
||||
Siberton | 155 mi | 2 h 24 min | 5.1 gal | |
I 59 7 mi, 06 min
|
||||
Steele | 162 mi | 2 h 31 min | 5.4 gal | |
I 59 45 mi, 39 min
|
||||
Mountain Brook | 207 mi | 3 h 10 min | 7.0 gal | |
I 459 7 mi, 08 min
|
||||
Brookview | 214 mi | 3 h 18 min | 7.3 gal |
Frequently Asked Questions
How much does it cost to drive from Acme Mill to Brookview?
Fuel cost: 28.3 USD
This fuel cost is calculated as: (Route length 214.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.88 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Acme Mill to Brookview?
Driving time: 3 h 18 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 159 mi with a maximum speed 68 mph = 2 h 20 min
- 19 mi with a maximum speed 65 mph = 17 min
- 8 mi with a maximum speed 62 mph = 7 min
- 12 mi with a maximum speed 55 mph = 13 min
- 15 mi with a maximum speed 50 mph = 18 min
- 1 mi with a maximum speed 31 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Acme Mill to Brookview by land?
The distance between Acme Mill and Brookview is 214.4 mi by road including 211.9 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Acme Mill and Brookview respectively.
How far is Acme Mill to Brookview by plane?
The shortest distance (air line, as the crow flies) between Acme Mill and Brookview is 194.5 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Acme Mill and Brookview respectively. Actual distance between airports may be different.
How many hours is Acme Mill from Brookview by plane?
Boeing 737 airliner needs 23 min to cover the distance of 194 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 1 h 25 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Acme Mill to Brookview?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 1 h 18 min to cover the distance of 194 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 1 h 29 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Acme Mill and Brookview?
The halfway point between Acme Mill and Brookview is Fort Payne. It is located about 4 mi from the exact midpoint by road.
The distance from Fort Payne to Acme Mill is 111 mi and driving will take about 1 h 46 min. The road between Fort Payne and Brookview has length 104 mi and will take approximately 1 h 32 min.
The other cities located close to halfway point:
Where is Acme Mill in relation to Brookview?
Acme Mill is located 194 mi north-east of Brookview.
Acme Mill has geographic coordinates: latitude 35.55007, longitude -84.56827.
Brookview has geographic coordinates: latitude 33.40565, longitude -86.77388.
Which highway goes from Acme Mill to Brookview?
The route from Acme Mill to Brookview follows I 59.
Other minor sections pass along the road:
- I 75: 54 mi
- I 24: 17 mi
- I 459: 16 mi
- US 11: 4 mi
- US 64: 4 mi
- US 27: 1 mi