Distance between Algoma Mills ON and Bruce Mines ON
The distance from Algoma Mills to Bruce Mines is 53 miles by road. Road takes approximately 59 minutes and goes through Blind River, Iron Bridge, Huron Shores and Thessalon.
| Shortest distance by air | 47 mi ✈️ |
| Car route length | 52.8 mi 🚗 |
| Driving time | 59 min |
| Fuel amount | 1.8 gal |
| Fuel cost | 7 USD |
| Point | Distance | Time | Fuel | |
| Algoma Mills | 0 mi | 00 min | 0.0 gal | |
|
17 7 mi, 08 min
|
||||
| Blind River | 7 mi | 08 min | 0.2 gal | |
|
17 17 mi, 19 min
|
||||
| Iron Bridge | 24 mi | 27 min | 0.7 gal | |
|
17 8 mi, 09 min
|
||||
| Huron Shores | 32 mi | 36 min | 1.0 gal | |
|
17 8 mi, 08 min
|
||||
| Thessalon | 40 mi | 45 min | 1.3 gal | |
|
17 13 mi, 14 min
|
||||
| Bruce Mines | 53 mi | 59 min | 1.7 gal | |
Frequently Asked Questions
How much does it cost to drive from Algoma Mills to Bruce Mines?
Fuel cost: 7 USD
This fuel cost is calculated as: (Route length 52.8 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.89 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Algoma Mills to Bruce Mines?
Driving time: 59 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 47 mi with a maximum speed 56 mph = 50 min
- 1 mi with a maximum speed 43 mph = 1 min
- 1 mi with a maximum speed 37 mph = 1 min
- 2 mi with a maximum speed 31 mph = 5 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Algoma Mills to Bruce Mines by land?
The distance between Algoma Mills and Bruce Mines is 52.8 mi by road.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Algoma Mills and Bruce Mines respectively.
How far is Algoma Mills to Bruce Mines by plane?
The shortest distance (air line, as the crow flies) between Algoma Mills and Bruce Mines is 47.2 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Algoma Mills and Bruce Mines respectively. Actual distance between airports may be different.
How many hours is Algoma Mills from Bruce Mines by plane?
Boeing 737 airliner needs 5 min to cover the distance of 47 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 20 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Algoma Mills to Bruce Mines?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 19 min to cover the distance of 47 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 21 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Algoma Mills and Bruce Mines?
The halfway point between Algoma Mills and Bruce Mines is Iron Bridge. It is located about 2 mi from the exact midpoint by road.
The distance from Iron Bridge to Algoma Mills is 24 mi and driving will take about 27 min. The road between Iron Bridge and Bruce Mines has length 29 mi and will take approximately 32 min.
The other cities located close to halfway point:
Where is Algoma Mills in relation to Bruce Mines?
Algoma Mills is located 47 mi east of Bruce Mines.
Algoma Mills has geographic coordinates: latitude 46.18612, longitude -82.81965.
Bruce Mines has geographic coordinates: latitude 46.30236, longitude -83.79274.
Which highway goes from Algoma Mills to Bruce Mines?
The route from Algoma Mills to Bruce Mines follows 17.