Distance between Appleton WI and Janesville WI
The distance from Appleton to Janesville is 128 miles by road including 64 miles on motorways. Road takes approximately 2 hours and 13 minutes and goes through Oshkosh, Menasha, Fox Crossing, Beaver Dam, Watertown and Fort Atkinson.
Shortest distance by air | 113 mi ✈️ |
Car route length | 128 mi 🚗 |
Driving time | 2 h 13 min |
Fuel amount | 4.4 gal |
Fuel cost | 16.6 USD |
Point | Distance | Time | Fuel | |
Appleton | 0 mi | 00 min | 0.0 gal | |
WI 47 3 mi, 03 min
|
||||
Menasha | 3 mi | 03 min | 0.1 gal | |
US 10 WI 441 2 mi, 01 min
|
||||
Fox Crossing | 5 mi | 05 min | 0.1 gal | |
WI 441 I 41 16 mi, 14 min
|
||||
Oshkosh | 21 mi | 19 min | 0.7 gal | |
I 41 WI 26 19 mi, 19 min
|
||||
Rosendale | 39 mi | 38 min | 1.1 gal | |
WI 26 US 151 22 mi, 23 min
|
||||
Beaver Dam | 62 mi | 1 h 02 min | 2.1 gal | |
US 151 WI 33 8 mi, 08 min
|
||||
Oak Grove | 70 mi | 1 h 11 min | 2.3 gal | |
CTH A WI 26 16 mi, 16 min
|
||||
Watertown | 86 mi | 1 h 27 min | 2.8 gal | |
WI 26 21 mi, 21 min
|
||||
Fort Atkinson | 107 mi | 1 h 49 min | 3.6 gal | |
WI 26 21 mi, 23 min
|
||||
Janesville | 128 mi | 2 h 13 min | 4.2 gal |
Hotels of Janesville
Frequently Asked Questions
How much does it cost to drive from Appleton to Janesville?
Fuel cost: 16.6 USD
This fuel cost is calculated as: (Route length 128 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.82 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Appleton to Janesville?
Driving time: 2 h 13 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 19 mi with a maximum speed 68 mph = 17 min
- 39 mi with a maximum speed 65 mph = 36 min
- 4 mi with a maximum speed 62 mph = 3 min
- 25 mi with a maximum speed 56 mph = 26 min
- 21 mi with a maximum speed 55 mph = 22 min
- 14 mi with a maximum speed 50 mph = 17 min
- 4 mi with a maximum speed 35 mph = 7 min
- 1 mi with a maximum speed 30 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Appleton to Janesville by land?
The distance between Appleton and Janesville is 128 mi by road including 64 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Appleton and Janesville respectively.
How far is Appleton to Janesville by plane?
The shortest distance (air line, as the crow flies) between Appleton and Janesville is 113.1 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Appleton and Janesville respectively. Actual distance between airports may be different.
How many hours is Appleton from Janesville by plane?
Boeing 737 airliner needs 13 min to cover the distance of 113 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 49 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Appleton to Janesville?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 45 min to cover the distance of 113 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 52 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Appleton and Janesville?
The halfway point between Appleton and Janesville is Beaver Dam. It is located about 2 mi from the exact midpoint by road.
The distance from Beaver Dam to Appleton is 62 mi and driving will take about 1 h 2 min. The road between Beaver Dam and Janesville has length 66 mi and will take approximately 1 h 10 min.
The other cities located close to halfway point:
Where is Appleton in relation to Janesville?
Appleton is located 113 mi north-east of Janesville.
Appleton has geographic coordinates: latitude 44.26113, longitude -88.40676.
Janesville has geographic coordinates: latitude 42.68298, longitude -89.02268.
Which highway goes from Appleton to Janesville?
The route from Appleton to Janesville follows WI 26.
Other minor sections pass along the road:
- I 41: 19 mi
- US 41: 19 mi
- US 151: 16 mi
- WI 16: 7 mi
- CTH A: 6 mi
- CTH I: 4 mi
- WI 33: 4 mi
- US 10: 2 mi
- WI 441: 2 mi
- WI 47: 1 mi