Distance between Canoe Furnace PA and Tratebas Mill IN
The distance from Canoe Furnace to Tratebas Mill is 421 miles by road including 416 miles on motorways. Road takes approximately 6 hours and 17 minutes and goes through Elyria, Toledo, South Bend, Girard, Streetsboro, Hudson and Brecksville.
Shortest distance by air | 390 mi ✈️ |
Car route length | 420.7 mi 🚗 |
Driving time | 6 h 17 min |
Fuel amount | 14.3 gal |
Fuel cost | 56.2 USD |
Point | Distance | Time | Fuel | |
Canoe Furnace | 0 mi | 00 min | 0.0 gal | |
I 80 66 mi, 1 h 01 min
|
||||
Girard | 66 mi | 1 h 01 min | 2.2 gal | |
I 80 39 mi, 33 min
|
||||
Streetsboro | 104 mi | 1 h 35 min | 3.4 gal | |
I 80 7 mi, 06 min
|
||||
Hudson | 111 mi | 1 h 41 min | 3.6 gal | |
I 80 9 mi, 08 min
|
||||
Brecksville | 121 mi | 1 h 50 min | 4.1 gal | |
I 80 2 mi, 01 min
|
||||
Broadview Heights | 122 mi | 1 h 51 min | 4.1 gal | |
I 80 24 mi, 21 min
|
||||
Elyria | 147 mi | 2 h 12 min | 4.9 gal | |
I 80 85 mi, 1 h 15 min
|
||||
Toledo | 232 mi | 3 h 28 min | 7.8 gal | |
I 80 145 mi, 2 h 08 min
|
||||
South Bend | 377 mi | 5 h 36 min | 12.7 gal | |
I 80 44 mi, 41 min
|
||||
Tratebas Mill | 421 mi | 6 h 17 min | 14.3 gal |
Frequently Asked Questions
How much does it cost to drive from Canoe Furnace to Tratebas Mill?
Fuel cost: 56.2 USD
This fuel cost is calculated as: (Route length 420.7 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Canoe Furnace to Tratebas Mill?
Driving time: 6 h 17 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 406 mi with a maximum speed 68 mph = 5 h 58 min
- 6 mi with a maximum speed 65 mph = 5 min
- 2 mi with a maximum speed 62 mph = 1 min
- 2 mi with a maximum speed 55 mph = 2 min
- 4 mi with a maximum speed 31 mph = 7 min
- 1 mi with a maximum speed 12 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Canoe Furnace to Tratebas Mill by land?
The distance between Canoe Furnace and Tratebas Mill is 420.7 mi by road including 415.7 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Canoe Furnace and Tratebas Mill respectively.
How far is Canoe Furnace to Tratebas Mill by plane?
The shortest distance (air line, as the crow flies) between Canoe Furnace and Tratebas Mill is 389.6 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Canoe Furnace and Tratebas Mill respectively. Actual distance between airports may be different.
How many hours is Canoe Furnace from Tratebas Mill by plane?
Boeing 737 airliner needs 47 min to cover the distance of 390 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 2 h 51 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Canoe Furnace to Tratebas Mill?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 2 h 36 min to cover the distance of 390 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 2 h 59 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Canoe Furnace and Tratebas Mill?
The halfway point between Canoe Furnace and Tratebas Mill is Glenwood. It is located about 17 mi from the exact midpoint by road.
The distance from Glenwood to Canoe Furnace is 227 mi and driving will take about 3 h 24 min. The road between Glenwood and Tratebas Mill has length 193 mi and will take approximately 2 h 53 min.
The other cities located close to halfway point:
Where is Canoe Furnace in relation to Tratebas Mill?
Canoe Furnace is located 390 mi east of Tratebas Mill.
Canoe Furnace has geographic coordinates: latitude 41.18895, longitude -79.51782.
Tratebas Mill has geographic coordinates: latitude 41.56309, longitude -87.01781.
Which highway goes from Canoe Furnace to Tratebas Mill?
The route from Canoe Furnace to Tratebas Mill follows I 80, I 90.
Other minor sections pass along the road:
- SR 11: 4 mi