Distance between Chino Hills CA and Beacon Station CA

The distance from Chino Hills to Beacon Station is 141 miles by road including 137 miles on motorways. Road takes approximately 2 hours and 10 minutes and goes through Pomona, Chino, Ontario, Rancho Cucamonga, Fontana and Victorville.

Shortest distance by air 118 mi ✈️
Car route length 141.1 mi 🚗
Driving time 2 h 10 min
Fuel amount 4.8 gal
Fuel cost 18.4 USD
Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Chino Hills 0 mi 0:00 00 min 0.0 gal
4 mi, 05 min
Pomona 4 mi 0:05 05 min 0.1 gal
CA 60 2 mi, 03 min
Chino 7 mi 0:08 08 min 0.2 gal
CA 60 7 mi, 08 min
Ontario 14 mi 0:16 16 min 0.3 gal
CA 60 10 mi, 09 min
Rancho Cucamonga 24 mi 0:26 26 min 0.7 gal
I 15 5 mi, 04 min
Fontana 29 mi 0:30 30 min 1.0 gal
I 15 17 mi, 15 min
Hesperia 47 mi 0:46 46 min 1.5 gal
I 15 10 mi, 08 min
Victorville 57 mi 0:55 55 min 1.7 gal
I 15 24 mi, 21 min
Barstow 80 mi 1:16 1 h 16 min 2.2 gal
I 15 61 mi, 53 min
Beacon Station 141 mi 2:09 2 h 09 min 4.8 gal
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Chino Hills 0 mi 0:00 00 min 0.0 gal
4 mi, 05 min
Pomona 4 mi 0:05 05 min 0.1 gal
CA 60 2 mi, 03 min
Chino 7 mi 0:08 08 min 0.2 gal
CA 60 7 mi, 08 min
Ontario 14 mi 0:16 16 min 0.3 gal
CA 60 10 mi, 09 min
Rancho Cucamonga 24 mi 0:26 26 min 0.7 gal
I 15 5 mi, 04 min
Fontana 29 mi 0:30 30 min 1.0 gal
I 15 8 mi, 07 min
Cosy Dell 37 mi 0:38 38 min 1.3 gal
I 15 1 mi, 01 min
Cajon 39 mi 0:39 39 min 1.3 gal
I 15 2 mi, 02 min
Cajon Junction 41 mi 0:41 41 min 1.4 gal
I 15 6 mi, 05 min
Hesperia 47 mi 0:46 46 min 1.5 gal
I 15 10 mi, 08 min
Victorville 57 mi 0:54 54 min 1.7 gal
I 15 24 mi, 21 min
Barstow 80 mi 1:16 1 h 16 min 2.2 gal
I 15 46 mi, 40 min
Midway 126 mi 1:56 1 h 56 min 4.2 gal
I 15 11 mi, 09 min
Cronese Valley 137 mi 2:05 2 h 05 min 4.5 gal
I 15 4 mi, 04 min
Beacon Station 141 mi 2:09 2 h 09 min 4.8 gal

Frequently Asked Questions

How much does it cost to drive from Chino Hills to Beacon Station?

Fuel cost: 18.4 USD

This fuel cost is calculated as: (Route length 141.1 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.82 USD / gal)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Chino Hills to Beacon Station?

Driving time: 2 h 10 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 116 mi with a maximum speed 68 mph = 1 h 42 min
  • 9 mi with a maximum speed 65 mph = 8 min
  • 2 mi with a maximum speed 55 mph = 1 min
  • 13 mi with a maximum speed 50 mph = 15 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Chino Hills to Beacon Station by land?

The distance between Chino Hills and Beacon Station is 141.1 mi by road including 137.3 mi on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Chino Hills and Beacon Station respectively.

How far is Chino Hills to Beacon Station by plane?

The shortest distance (air line, as the crow flies) between Chino Hills and Beacon Station is 118.1 mi.

This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Chino Hills and Beacon Station respectively. Actual distance between airports may be different.

How many hours is Chino Hills from Beacon Station by plane?

Boeing 737 airliner needs 14 min to cover the distance of 118 mi at a cruising speed of 497 mph.

Small plane "Cessna 172" needs 51 min to flight this distance at average speed of 136 mph.

This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.

How long is a helicopter ride from Chino Hills to Beacon Station?

Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 47 min to cover the distance of 118 mi at a cruising speed of 149 mph.

Popular "Robinson R44" needs 54 min to flight this distance at average speed of 130 mph.

This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.

What city is halfway between Chino Hills and Beacon Station?

The halfway point between Chino Hills and Beacon Station is Barstow. It is located about 10 mi from the exact midpoint by road.

The distance from Barstow to Chino Hills is 80 mi and driving will take about 1 h 16 min. The road between Barstow and Beacon Station has length 61 mi and will take approximately 54 min.

The other cities located close to halfway point:

  • Victorville is in 57 mi from Chino Hills and 85 mi from Beacon Station

Where is Chino Hills in relation to Beacon Station?

Chino Hills is located 118 mi south-west of Beacon Station.

Chino Hills has geographic coordinates: latitude 33.99268, longitude -117.76006.

Beacon Station has geographic coordinates: latitude 35.13248, longitude -116.20891.

Which highway goes from Chino Hills to Beacon Station?

The route from Chino Hills to Beacon Station follows I 15.

Other minor sections pass along the road:

  • CA 60: 11 mi
  • CA 18: 2 mi
Have any questions? Contact us!
<