Distance between Clive IA and Ankeny IA
The distance from Clive to Ankeny is 18 miles by road including 11 miles on motorways. Road takes approximately 19 minutes and goes through Urbandale.
| Shortest distance by air | 12 mi ✈️ |
| Car route length | 18 mi 🚗 |
| Driving time | 19 min |
| Fuel amount | 0.6 gal |
| Fuel cost | 2.4 USD |
| Point | Distance | Time | Fuel | |
| Clive | 0 mi | 00 min | 0.0 gal | |
|
4 mi, 04 min
|
||||
| Urbandale | 4 mi | 04 min | 0.0 gal | |
|
I 35 I 80 14 mi, 14 min
|
||||
| Ankeny | 18 mi | 19 min | 0.5 gal | |
Hotels of Ankeny
Frequently Asked Questions
How much does it cost to drive from Clive to Ankeny?
Fuel cost: 2.4 USD
This fuel cost is calculated as: (Route length 18 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.9 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Clive to Ankeny?
Driving time: 19 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 10 mi with a maximum speed 65 mph = 8 min
- 2 mi with a maximum speed 56 mph = 2 min
- 1 mi with a maximum speed 50 mph = 1 min
- 3 mi with a maximum speed 50 mph = 4 min
- 1 mi with a maximum speed 25 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Clive to Ankeny by land?
The distance between Clive and Ankeny is 18 mi by road including 10.6 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Clive and Ankeny respectively.
Where is Clive in relation to Ankeny?
Clive is located 12 mi south-west of Ankeny.
Clive has geographic coordinates: latitude 41.6096, longitude -93.77544.
Ankeny has geographic coordinates: latitude 41.73187, longitude -93.60038.
Which highway goes from Clive to Ankeny?
The route from Clive to Ankeny follows I 80, I 35.
Other minor sections pass along the road:
- IA 415: 4 mi
- US 69: 2 mi
- IA 160: 1 mi