Distance between Henderson PA and Tratebas Mill IN
The distance from Henderson to Tratebas Mill is 434 miles by road including 427 miles on motorways. Road takes approximately 6 hours and 30 minutes and goes through Elyria, Toledo, South Bend, Girard, Streetsboro, Hudson and Brecksville.
Shortest distance by air | 402 mi ✈️ |
Car route length | 434.3 mi 🚗 |
Driving time | 6 h 30 min |
Fuel amount | 14.8 gal |
Fuel cost | 58.1 USD |
Point | Distance | Time | Fuel | |
Henderson | 0 mi | 00 min | 0.0 gal | |
I 80 80 mi, 1 h 14 min
|
||||
Girard | 80 mi | 1 h 14 min | 2.7 gal | |
I 80 39 mi, 33 min
|
||||
Streetsboro | 117 mi | 1 h 48 min | 3.9 gal | |
I 80 7 mi, 06 min
|
||||
Hudson | 125 mi | 1 h 54 min | 4.1 gal | |
I 80 9 mi, 08 min
|
||||
Brecksville | 134 mi | 2 h 03 min | 4.6 gal | |
I 80 2 mi, 01 min
|
||||
Broadview Heights | 136 mi | 2 h 04 min | 4.6 gal | |
I 80 24 mi, 21 min
|
||||
Elyria | 160 mi | 2 h 25 min | 5.4 gal | |
I 80 85 mi, 1 h 15 min
|
||||
Toledo | 245 mi | 3 h 41 min | 8.3 gal | |
I 80 145 mi, 2 h 08 min
|
||||
South Bend | 391 mi | 5 h 49 min | 13.2 gal | |
I 80 44 mi, 41 min
|
||||
Tratebas Mill | 435 mi | 6 h 30 min | 14.7 gal |
Frequently Asked Questions
How much does it cost to drive from Henderson to Tratebas Mill?
Fuel cost: 58.1 USD
This fuel cost is calculated as: (Route length 434.3 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Henderson to Tratebas Mill?
Driving time: 6 h 30 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 418 mi with a maximum speed 68 mph = 6 h 8 min
- 6 mi with a maximum speed 65 mph = 5 min
- 2 mi with a maximum speed 62 mph = 1 min
- 2 mi with a maximum speed 55 mph = 2 min
- 1 mi with a maximum speed 50 mph = 1 min
- 6 mi with a maximum speed 31 mph = 11 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Henderson to Tratebas Mill by land?
The distance between Henderson and Tratebas Mill is 434.3 mi by road including 426.9 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Henderson and Tratebas Mill respectively.
How far is Henderson to Tratebas Mill by plane?
The shortest distance (air line, as the crow flies) between Henderson and Tratebas Mill is 402 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Henderson and Tratebas Mill respectively. Actual distance between airports may be different.
How many hours is Henderson from Tratebas Mill by plane?
Boeing 737 airliner needs 48 min to cover the distance of 402 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 2 h 56 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Henderson to Tratebas Mill?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 2 h 41 min to cover the distance of 402 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 3 h 4 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Henderson and Tratebas Mill?
The halfway point between Henderson and Tratebas Mill is York. It is located about 16 mi from the exact midpoint by road.
The distance from York to Henderson is 201 mi and driving will take about 3 h 2 min. The road between York and Tratebas Mill has length 233 mi and will take approximately 3 h 28 min.
The other cities located close to halfway point:
Where is Henderson in relation to Tratebas Mill?
Henderson is located 402 mi east of Tratebas Mill.
Henderson has geographic coordinates: latitude 41.17451, longitude -79.27671.
Tratebas Mill has geographic coordinates: latitude 41.56309, longitude -87.01781.
Which highway goes from Henderson to Tratebas Mill?
The route from Henderson to Tratebas Mill follows I 80, I 90.
Other minor sections pass along the road:
- PA 66: 5 mi
- SR 11: 4 mi