Distance between Lakewood CO and Fenders CO

The distance from Lakewood to Fenders is 17 miles by road including 8 miles on motorways. Road takes approximately 20 minutes and goes through Twin Forks.

Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Lakewood 0 mi 0:00 00 min 0.0 gal
US 285 17 mi, 20 min
Twin Forks 17 mi 0:20 20 min 0.5 gal

Frequently Asked Questions

How much does it cost to drive from Lakewood to Fenders?

Fuel cost: 2.2 USD

This fuel cost is calculated as: (Route length 16.8 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.82 USD / gal)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Lakewood to Fenders?

Driving time: 20 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 5 mi with a maximum speed 65 mph = 4 min
  • 1 mi with a maximum speed 62 mph = 1 min
  • 2 mi with a maximum speed 50 mph = 2 min
  • 2 mi with a maximum speed 50 mph = 2 min
  • 2 mi with a maximum speed 45 mph = 3 min
  • 2 mi with a maximum speed 40 mph = 2 min
  • 2 mi with a maximum speed 31 mph = 3 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Lakewood to Fenders by land?

The distance between Lakewood and Fenders is 16.8 mi by road including 8.1 mi on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Lakewood and Fenders respectively.

Where is Lakewood in relation to Fenders?

Lakewood is located 12 mi north-east of Fenders.

Lakewood has geographic coordinates: latitude 39.70866, longitude -105.08465.

Fenders has geographic coordinates: latitude 39.57388, longitude -105.21693.

Which highway goes from Lakewood to Fenders?

The route from Lakewood to Fenders follows US 285.

Other minor sections pass along the road:

  • CO 121: 4 mi
Have any questions? Contact us!
<