Distance between Maltby WA and Hansville WA

The distance from Maltby to Hansville is 35 miles by road including 14 miles on motorways. Road takes approximately 1 hour and 7 minutes and goes through North Creek, Woodinville, Bothell, Alderwood Manor, Lynnwood, Edmonds and Kingston.

Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Maltby 0 mi 0:00 00 min 0.0 gal
WA 524 2 mi, 02 min
North Creek 2 mi 0:02 02 min 0.0 gal
WA 522 2 mi, 02 min
Woodinville 4 mi 0:04 04 min 0.1 gal
WA 522 4 mi, 03 min
Bothell 7 mi 0:07 07 min 0.2 gal
I 405 4 mi, 04 min
Alderwood Manor 12 mi 0:11 11 min 0.4 gal
I 405 3 mi, 04 min
Lynnwood 15 mi 0:16 16 min 0.4 gal
WA 524 3 mi, 05 min
Edmonds 18 mi 0:21 21 min 0.6 gal
WA 524 8 mi, 31 min
Kingston 26 mi 0:53 53 min 0.8 gal
WA 104 9 mi, 13 min
Hansville 35 mi 1:07 1 h 07 min 1.1 gal

Frequently Asked Questions

How much does it cost to drive from Maltby to Hansville?

Fuel cost: 4.7 USD

This fuel cost is calculated as: (Route length 35.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Maltby to Hansville?

Driving time: 1 h 7 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 11 mi with a maximum speed 60 mph = 10 min
  • 4 mi with a maximum speed 50 mph = 4 min
  • 3 mi with a maximum speed 50 mph = 3 min
  • 4 mi with a maximum speed 45 mph = 5 min
  • 4 mi with a maximum speed 35 mph = 6 min
  • 2 mi with a maximum speed 30 mph = 4 min
  • 2 mi with a maximum speed 25 mph = 4 min
  • 6 mi with a maximum speed 12 mph = 26 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Maltby to Hansville by land?

The distance between Maltby and Hansville is 35.4 mi by road including 13.7 mi on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Maltby and Hansville respectively.

How far is Maltby to Hansville by plane?

The shortest distance (air line, as the crow flies) between Maltby and Hansville is 21.7 mi.

This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Maltby and Hansville respectively. Actual distance between airports may be different.

How many hours is Maltby from Hansville by plane?

Boeing 737 airliner needs 2 min to cover the distance of 22 mi at a cruising speed of 497 mph.

Small plane "Cessna 172" needs 9 min to flight this distance at average speed of 136 mph.

This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.

How long is a helicopter ride from Maltby to Hansville?

Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 8 min to cover the distance of 22 mi at a cruising speed of 149 mph.

Popular "Robinson R44" needs 10 min to flight this distance at average speed of 130 mph.

This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.

What city is halfway between Maltby and Hansville?

The halfway point between Maltby and Hansville is Edmonds.

The distance from Edmonds to Maltby is 18 mi and driving will take about 21 min. The road between Edmonds and Hansville has length 17 mi and will take approximately 45 min.

The other cities located close to halfway point:

  • Lynnwood is in 15 mi from Maltby and 21 mi from Hansville

Where is Maltby in relation to Hansville?

Maltby is located 22 mi east of Hansville.

Maltby has geographic coordinates: latitude 47.80517, longitude -122.11449.

Hansville has geographic coordinates: latitude 47.9187, longitude -122.55431.

Have any questions? Contact us!