Distance between Oakley UT and Kimball Junction UT
The distance from Oakley to Kimball Junction is 24 miles by road including 11 miles on motorways. Road takes approximately 25 minutes and goes through Park City, Peoa, Quinn’s Junction and Silver Creek Junction.
Shortest distance by air | 13 mi ✈️ |
Car route length | 23.6 mi 🚗 |
Driving time | 25 min |
Fuel amount | 0.8 gal |
Fuel cost | 3.2 USD |
Point | Distance | Time | Fuel | |
Oakley | 0 mi | 00 min | 0.0 gal | |
UT 32 3 mi, 03 min
|
||||
Peoa | 3 mi | 03 min | 0.1 gal | |
UT 32 UT 248 11 mi, 12 min
|
||||
Quinn’s Junction | 14 mi | 15 min | 0.4 gal | |
US 189 US 40 3 mi, 03 min
|
||||
Silver Creek Junction | 17 mi | 19 min | 0.5 gal | |
I 80 7 mi, 06 min
|
||||
Kimball Junction | 24 mi | 25 min | 0.6 gal |
Frequently Asked Questions
How much does it cost to drive from Oakley to Kimball Junction?
Fuel cost: 3.2 USD
This fuel cost is calculated as: (Route length 23.6 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.9 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Oakley to Kimball Junction?
Driving time: 25 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 6 mi with a maximum speed 68 mph = 4 min
- 1 mi with a maximum speed 62 mph = 1 min
- 1 mi with a maximum speed 56 mph = 1 min
- 8 mi with a maximum speed 55 mph = 9 min
- 5 mi with a maximum speed 50 mph = 6 min
- 1 mi with a maximum speed 35 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Oakley to Kimball Junction by land?
The distance between Oakley and Kimball Junction is 23.6 mi by road including 11.2 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Oakley and Kimball Junction respectively.
What city is halfway between Oakley and Kimball Junction?
The halfway point between Oakley and Kimball Junction is Quinn’s Junction. It is located about 2 mi from the exact midpoint by road.
The distance from Quinn’s Junction to Oakley is 14 mi and driving will take about 15 min. The road between Quinn’s Junction and Kimball Junction has length 10 mi and will take approximately 9 min.
Where is Oakley in relation to Kimball Junction?
Oakley is located 13 mi east of Kimball Junction.
Oakley has geographic coordinates: latitude 40.71468, longitude -111.30073.
Kimball Junction has geographic coordinates: latitude 40.72717, longitude -111.54409.
Which highway goes from Oakley to Kimball Junction?
The route from Oakley to Kimball Junction follows I 80.
Other minor sections pass along the road:
- UT 32: 4 mi
- US 40: 4 mi
- US 189: 3 mi
- UT 248: 2 mi