Distance between Oakville ON and Ballinafad ON

The distance from Oakville to Ballinafad is 29 miles by road including 15 miles on motorways. Road takes approximately 33 minutes and goes through Mississauga and Milton.

There are tolls on the route.
Click here to load the interactive map
Compare this route in other services:
City
Town
Village
Hamlet
Motorway
Primary
Secondary
Unclassified
Point Distance Time Fuel
Oakville 0 mi 0:00 00 min 0.0 gal
403 7 mi, 08 min
Milton 7 mi 0:08 08 min 0.3 gal
3 mi, 02 min
Mississauga 11 mi 0:11 11 min 0.3 gal
407 ETR 3 18 mi, 21 min
43.69591, -80.01186 29 mi 0:33 33 min 1.0 gal

Frequently Asked Questions

How much does it cost to drive from Oakville to Ballinafad?

Fuel cost: 3.7 USD

This fuel cost is calculated as: (Route length 28.6 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.82 USD / gal)

You can adjust fuel consumption and fuel price here.

How long is a car ride from Oakville to Ballinafad?

Driving time: 33 min

This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.

  • 14 mi with a maximum speed 62 mph = 13 min
  • 7 mi with a maximum speed 50 mph = 8 min
  • 2 mi with a maximum speed 43 mph = 3 min
  • 2 mi with a maximum speed 37 mph = 3 min
  • 1 mi with a maximum speed 31 mph = 2 min

The calculated driving time does not take into account intermediate stops and traffic jams.

How far is Oakville to Ballinafad by land?

The distance between Oakville and Ballinafad is 28.6 mi by road including 14.9 mi on motorways.

Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Oakville and Ballinafad respectively.

How far is Oakville to Ballinafad by plane?

The shortest distance (air line, as the crow flies) between Oakville and Ballinafad is 24.2 mi.

This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Oakville and Ballinafad respectively. Actual distance between airports may be different.

How many hours is Oakville from Ballinafad by plane?

Boeing 737 airliner needs 2 min to cover the distance of 24 mi at a cruising speed of 497 mph.

Small plane "Cessna 172" needs 10 min to flight this distance at average speed of 136 mph.

This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.

How long is a helicopter ride from Oakville to Ballinafad?

Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 9 min to cover the distance of 24 mi at a cruising speed of 149 mph.

Popular "Robinson R44" needs 11 min to flight this distance at average speed of 130 mph.

This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.

What city is halfway between Oakville and Ballinafad?

The halfway point between Oakville and Ballinafad is Mississauga. It is located about 4 mi from the exact midpoint by road.

The distance from Mississauga to Oakville is 11 mi and driving will take about 11 min. The road between Mississauga and Ballinafad has length 18 mi and will take approximately 21 min.

Where is Oakville in relation to Ballinafad?

Oakville is located 24 mi south-east of Ballinafad.

Oakville has geographic coordinates: latitude 43.44744, longitude -79.66667.

Ballinafad has geographic coordinates: latitude 43.69591, longitude -80.01186.

Which highway goes from Oakville to Ballinafad?

The route from Oakville to Ballinafad follows 3.

Other minor sections pass along the road:

  • 407 ETR: 6 mi
  • 403: 5 mi
  • 7: 2 mi
  • 401: 1 mi
  • QEW: 1 mi
Have any questions? Contact us!
<