Distance between Oakwood IN and Tratebas Mill IN
The distance from Oakwood to Tratebas Mill is 22 miles by road including 14 miles on motorways. Road takes approximately 23 minutes and goes through Michigan City, Waterford and Woodville.
| Shortest distance by air | 14 mi ✈️ |
| Car route length | 22.4 mi 🚗 |
| Driving time | 23 min |
| Fuel amount | 0.8 gal |
| Fuel cost | 2.9 USD |
| Point | Distance | Time | Fuel | |
| Oakwood | 0 mi | 00 min | 0.0 gal | |
|
US 35 2 mi, 01 min
|
||||
| Michigan City | 2 mi | 01 min | 0.0 gal | |
|
US 20 I 94 3 mi, 02 min
|
||||
| Waterford | 4 mi | 04 min | 0.1 gal | |
|
I 94 16 mi, 15 min
|
||||
| Woodville | 21 mi | 19 min | 0.7 gal | |
|
2 mi, 03 min
|
||||
| Tratebas Mill | 22 mi | 23 min | 0.7 gal | |
Frequently Asked Questions
How much does it cost to drive from Oakwood to Tratebas Mill?
Fuel cost: 2.9 USD
This fuel cost is calculated as: (Route length 22.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.86 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Oakwood to Tratebas Mill?
Driving time: 23 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 14 mi with a maximum speed 68 mph = 12 min
- 4 mi with a maximum speed 56 mph = 3 min
- 2 mi with a maximum speed 50 mph = 2 min
- 2 mi with a maximum speed 31 mph = 4 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Oakwood to Tratebas Mill by land?
The distance between Oakwood and Tratebas Mill is 22.4 mi by road including 14.3 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Oakwood and Tratebas Mill respectively.
Where is Oakwood in relation to Tratebas Mill?
Oakwood is located 14 mi north-east of Tratebas Mill.
Oakwood has geographic coordinates: latitude 41.67837, longitude -86.78641.
Tratebas Mill has geographic coordinates: latitude 41.56309, longitude -87.01781.
Which highway goes from Oakwood to Tratebas Mill?
The route from Oakwood to Tratebas Mill follows I 94.
Other minor sections pass along the road:
- SR 49: 4 mi
- US 35: 1 mi