The distance from Port Macquarie to Brownsville is 291 miles by road including 240 miles on motorways. Road takes approximately 4 hours and 47 minutes and goes through Sovereign Hills, Johns River, Coopernook, Jones Island, Ghinni Ghinni, Cundletown and Dumaresq Island.
You can adjust fuel consumption and fuel price here.
How long is a car ride from Port Macquarie to Brownsville?
Driving time:
4 h 47 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
185 mi with a maximum speed 68 mph = 2 h 42 min
41 mi with a maximum speed 62 mph = 39 min
6 mi with a maximum speed 56 mph = 5 min
6 mi with a maximum speed 56 mph = 6 min
28 mi with a maximum speed 50 mph = 33 min
18 mi with a maximum speed 43 mph = 25 min
7 mi with a maximum speed 37 mph = 12 min
1 mi with a maximum speed 31 mph = 1 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Port Macquarie to Brownsville by land?
The distance between Port Macquarie and Brownsville is 291.4 mi by road including 240.5 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Port Macquarie and Brownsville respectively.
How far is Port Macquarie to Brownsville by plane?
The shortest distance (air line, as the crow flies) between Port Macquarie and Brownsville is 243.6 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Port Macquarie and Brownsville respectively. Actual distance between airports may be different.
How many hours is Port Macquarie from Brownsville by plane?
Boeing 737 airliner needs 29 min to cover the distance of 244 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 1 h 46 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Port Macquarie to Brownsville?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 1 h 38 min to cover the distance of 244 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 1 h 52 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Port Macquarie and Brownsville?
The halfway point between Port Macquarie and Brownsville is Beresfield. It is located about 1 mi from the exact midpoint by road.
The distance from Beresfield to Port Macquarie is 145 mi and driving will take about 2 h 16 min. The road between Beresfield and Brownsville has length 147 mi and will take approximately 2 h 31 min.
The other cities located close to halfway point:
Lenaghan is in 147 mi from Port Macquarie and 144 mi from Brownsville
Tarro is in 143 mi from Port Macquarie and 149 mi from Brownsville
Minmi is in 150 mi from Port Macquarie and 142 mi from Brownsville
Where is Port Macquarie in relation to Brownsville?
Port Macquarie is located 244 mi north-east of Brownsville.
Port Macquarie has geographic coordinates: latitude -31.42995, longitude 152.91035.
Brownsville has geographic coordinates: latitude -34.4825, longitude 150.81083.
Which highway goes from Port Macquarie to Brownsville?
The route from Port Macquarie to Brownsville follows A1, M1.
