Distance between Riverside WA and Lone Pine WA
The distance from Riverside to Lone Pine is 58 miles by road. Road takes approximately 1 hour and 5 minutes and goes through Omak, Elmer City, Nespelem, Koontzville, Seatons Grove and Belvedere.
| Shortest distance by air | 44 mi ✈️ |
| Car route length | 58.4 mi 🚗 |
| Driving time | 1 h 5 min |
| Fuel amount | 2 gal |
| Fuel cost | 7.7 USD |
| Point | Distance | Time | Fuel | |
| Riverside | 0 mi | 00 min | 0.0 gal | |
|
US 97 5 mi, 05 min
|
||||
| Omak | 5 mi | 05 min | 0.0 gal | |
|
US 97 WA 155 37 mi, 40 min
|
||||
| Elmer City | 42 mi | 46 min | 0.8 gal | |
|
WA 155 17 mi, 19 min
|
||||
| Lone Pine | 58 mi | 1 h 05 min | 2.0 gal | |
Frequently Asked Questions
How much does it cost to drive from Riverside to Lone Pine?
Fuel cost: 7.7 USD
This fuel cost is calculated as: (Route length 58.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.89 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Riverside to Lone Pine?
Driving time: 1 h 5 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 53 mi with a maximum speed 56 mph = 56 min
- 2 mi with a maximum speed 50 mph = 2 min
- 2 mi with a maximum speed 31 mph = 5 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Riverside to Lone Pine by land?
The distance between Riverside and Lone Pine is 58.4 mi by road.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Riverside and Lone Pine respectively.
How far is Riverside to Lone Pine by plane?
The shortest distance (air line, as the crow flies) between Riverside and Lone Pine is 44.1 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Riverside and Lone Pine respectively. Actual distance between airports may be different.
How many hours is Riverside from Lone Pine by plane?
Boeing 737 airliner needs 5 min to cover the distance of 44 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 19 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Riverside to Lone Pine?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 17 min to cover the distance of 44 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 20 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Riverside and Lone Pine?
The halfway point between Riverside and Lone Pine is Elmer City. It is located about 12 mi from the exact midpoint by road.
The distance from Elmer City to Riverside is 42 mi and driving will take about 46 min. The road between Elmer City and Lone Pine has length 17 mi and will take approximately 19 min.
Where is Riverside in relation to Lone Pine?
Riverside is located 44 mi north-west of Lone Pine.
Riverside has geographic coordinates: latitude 48.50268, longitude -119.50751.
Lone Pine has geographic coordinates: latitude 47.98238, longitude -118.96308.
Which highway goes from Riverside to Lone Pine?
The route from Riverside to Lone Pine follows WA 155.
Other minor sections pass along the road:
- US 97: 8 mi
- WA 20: 8 mi