Distance between Waco TX and Grandview TX
The distance from Waco to Grandview is 53 miles by road including 49 miles on motorways. Road takes approximately 48 minutes and goes through West, Bellmead, Lacy-Lakeview and Abbott.
Shortest distance by air | 50 mi ✈️ |
Car route length | 53.4 mi 🚗 |
Driving time | 48 min |
Fuel amount | 1.8 gal |
Fuel cost | 7.1 USD |
Point | Distance | Time | Fuel | |
Waco | 0 mi | 00 min | 0.0 gal | |
US 84 4 mi, 04 min
|
||||
Bellmead | 4 mi | 04 min | 0.1 gal | |
I 35 2 mi, 02 min
|
||||
Lacy-Lakeview | 7 mi | 07 min | 0.2 gal | |
I 35 3 mi, 02 min
|
||||
Elm Mott | 9 mi | 09 min | 0.3 gal | |
I 35 9 mi, 07 min
|
||||
West | 19 mi | 17 min | 0.5 gal | |
I 35 5 mi, 04 min
|
||||
Abbott | 24 mi | 21 min | 0.7 gal | |
I 35 I 35W 30 mi, 26 min
|
||||
Grandview | 53 mi | 48 min | 1.7 gal |
Frequently Asked Questions
How much does it cost to drive from Waco to Grandview?
Fuel cost: 7.1 USD
This fuel cost is calculated as: (Route length 53.4 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Waco to Grandview?
Driving time: 48 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 46 mi with a maximum speed 68 mph = 40 min
- 2 mi with a maximum speed 65 mph = 2 min
- 4 mi with a maximum speed 50 mph = 5 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Waco to Grandview by land?
The distance between Waco and Grandview is 53.4 mi by road including 49.1 mi on motorways.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Waco and Grandview respectively.
How far is Waco to Grandview by plane?
The shortest distance (air line, as the crow flies) between Waco and Grandview is 49.7 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Waco and Grandview respectively. Actual distance between airports may be different.
How many hours is Waco from Grandview by plane?
Boeing 737 airliner needs 6 min to cover the distance of 50 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 21 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Waco to Grandview?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 20 min to cover the distance of 50 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 22 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Waco and Grandview?
The halfway point between Waco and Grandview is Abbott. It is located about 3 mi from the exact midpoint by road.
The distance from Abbott to Waco is 24 mi and driving will take about 21 min. The road between Abbott and Grandview has length 30 mi and will take approximately 26 min.
The other cities located close to halfway point:
Where is Waco in relation to Grandview?
Waco is located 50 mi south of Grandview.
Waco has geographic coordinates: latitude 31.54933, longitude -97.14667.
Grandview has geographic coordinates: latitude 32.27042, longitude -97.17918.
Which highway goes from Waco to Grandview?
The route from Waco to Grandview follows I 35, US 77.
Other minor sections pass along the road:
- I 35W: 16 mi
- US 84: 3 mi